You can find plenty of products for cleaning the toilet bowl lid at the grocery store but you can also make your own cleaner from baking soda. All you have to do is apply the baking soda to stained areas and scour them with a dampened scrubbing sponge. Both of these materials have a tendency to attract stains and mildew.
Cleaning stains and mildew from toilet grout takes effort, but the end result is well worth it. Toilet caulk: You can use a toothbrush and simple kitchen items to clean the caulk around your toilet base. Add 1 cup of lemon juice mixed with at least drops of essential oils we recommend you use lemon, tea tree oil, lavender, which work well against mould formations.
If you still see yellowing or any more visible signs of rust or other stains, then repeat the procedure. Not an exact natural toilet bowl cleaner, but coke can still serve as an effective solution against rust, water or hard water stains. This works perfectly for light or heavy limescale build-up and the best part is that you can remove toilet bowl stains without scrubbing.
Pour coca-cola extensively inside the toilet bowl. If you have staining around the rim, make sure to cover that section, too.
If by any chance, you are dealing with a very stained toilet bowl, you may have to resort to specialised cleaning products with a chemical formula. We suggest the following:. It can make your toilet bowl clean quite easily.
Once you spray it on the stains, wait a few minutes before you remove it. The important thing to remember is that you should not flush the product down, but just wipe it with a clean cloth. Due to being highly corrosive and dangerous, we advise you to resort to bleach only in the worst-case scenario. Do not forget to put protective gloves on and open a window to let the toxic fumes out. Vinegar and baking soda : Add 1 or 2 cups of vinegar to the toilet bowl along with a few sprinkles of baking soda.
Swish the solution around the bowl with your brush for a few minutes and then let it sit for about 15 minutes. Scrub the stains with your brush or pumice stone. If this doesn't remove the stain, try adding some lemon juice to dissolve the last of it.
Turn the water back on, flush and repeat the cleaning process, if necessary. The acids in the soda help eat away at the stains. Let it sit overnight. Flush the next day and get to work with your pumice stone or brush on the now-loosened stains. White vinegar is a good remedy to clean stubborn toilet stains. Pour a ml bottle of white vinegar into the toilet bowl and put down the lid.
What causes yellow stains on a toilet seat? The yellow stains are caused by a build-up of mineral deposits originating from hard water, including magnesium, calcium and iron. Does WD remove rust stains from toilets? Yes, WD can help remove and prevent rust and corrosion. It works by softening tough lime and rust deposits for easy removal. Can Coke remove toilet stains?
Soda has the ability to remove pesky stains that may not be removed by a simple cleaning. You can spray Coca-Cola or pour it directly onto the affected area and let it sit overnight before wiping it away. What forms green or brown stains in a toilet?
Let the solution sit for about 10 minutes. Use a toilet brush to swish the solution around the bowl, making sure to get the solution onto any stains that are above the water line. Let the vinegar and soda solution sit for up to 30 minutes, swishing one or two more times until the stain is gone.
If any stain remains, scrub it with the toilet brush or a stiff-bristled nylon brush. Flush the toilet to rinse. While you have the baking soda and vinegar out, use them to give the bathroom sink drain a boost with some homemade drain cleaner. Borax is a great multi-purpose cleaning product that can be effectively used to clean hard water stains in the toilet and other plumbing fixtures.
Add 1 cup of vinegar and allow the mixture to sit in the bowl for about 20 minutes. Finish by scrubbing the bowl with a toilet brush to remove the stains. For really stubborn hard water toilet stains, try using Borax paste. Shutting off the water to the toilet at the fixture shutoff valve, then flush the toilet to drain the bowl.
This is necessary so that the hard water stains are not covered by water. Spread the paste immediately onto the hard water stains in the toilet so they are completely covered by the paste. Allow the paste to sit for 15 to 20 minutes.
0コメント